외팔보 Beam해석에서 총길이를 0.35m로하고 node를 0.05씩 8개로 잡고 마지막 노드에 하중을 19.6N주었습니다.
가로: 0.0295m, 세로: 0.0297m, I:0.644E-07 인 4각 Beam입니다.
탄성계수(E)는 69E9 입니다.
3번째 node(0.15m)에서의 strain을 알고 싶습니다.
저는 해석을 하고 general postproc..-plot result- nodal solution- item 항목에서 strain total를 설정해보았는데 그것도 신통치 않네요 전 엔시스5.6씁니다.
가르침 부탁드려요
가로: 0.0295m, 세로: 0.0297m, I:0.644E-07 인 4각 Beam입니다.
탄성계수(E)는 69E9 입니다.
3번째 node(0.15m)에서의 strain을 알고 싶습니다.
저는 해석을 하고 general postproc..-plot result- nodal solution- item 항목에서 strain total를 설정해보았는데 그것도 신통치 않네요 전 엔시스5.6씁니다.
가르침 부탁드려요
다음검색
댓글
댓글 리스트-
작성자지원이 아빠^^ 작성시간 03.09.26 <nsel,s,loc,x,0.15> <prnsol,epel,prin> 이하참고EPEL COMP Component elastic strains. " PRIN Principal elastic strains, strain intens., and equiv. strain. " FAIL Maximum Strain Failure Criteria. (Only works if FC command information is provided.) EPTH COMP Component thermal strains.
-
작성자와하하-_- 작성시간 03.11.28 PlotCtrls>Style>Size and Shape으로 가셔서 Display of element를 on시켜 보세요. 그리고 나서 Select>Entities를 이용하셔서 보고자 하시는 요소를 선택해 주시고 Replot해주시면 값을 보실 수 있을 겁니다.