CAFE

Do it yourself

Steam Liftoff:: Drone disarm. move throttle down to arm.

작성자석수|작성시간25.01.27|조회수18 목록 댓글 0

https://youtu.be/Smfyw-wd_b4?si=HxpjnCAhf9mo6BvY




How to ARM & DISARM a Drone

https://search.app/zZ6aSapm5f2LZ3DP6




drone disarm. move throttle down to arm


To disarm a drone, typically you need to move the throttle stick all the way down to its lowest position; this is usually done in conjunction with a dedicated "disarm" switch on your transmitter, effectively stopping the motors and putting the drone into a disarmed state. 

Key points to remember:

Throttle position:

Always ensure the throttle stick is fully down at the minimum position when attempting to disarm. 

Disarm switch:

Most drones require a dedicated switch on the transmitter to initiate the disarm function. 

Safety feature:

This design ensures that you can't accidentally arm the drone by simply moving the throttle up slightly; it needs to be fully down to activate the disarm command. 


드론 무장 해제. 스로틀을 아래로 이동하여 암으로 이동합니다


드론을 무장 해제하려면 일반적으로 스로틀 스틱을 가장 낮은 위치까지 이동시켜야 합니다. 이는 일반적으로 송신기의 전용 "무장 해제" 스위치와 함께 수행되어 모터를 효과적으로 멈추고 드론을 무장 해제 상태로 만듭니다. 

기억해야 할 주요 사항:

스로틀 위치:

무장 해제를 시도할 때 스로틀 스틱이 항상 최소 위치에서 완전히 내려졌는지 확인하세요. 

해제 스위치:

대부분의 드론은 무장 해제 기능을 시작하기 위해 송신기의 전용 스위치가 필요합니다. 

안전 기능:

이 설계는 스로틀을 약간 위로 이동시키는 것만으로 실수로 드론을 무장할 수 없도록 보장합니다. 무장 해제 명령을 활성화하려면 드론이 완전히 내려와야 합니다.




How to ARM & DISARM a Drone


By Kashmir Rose Pandolfi


What is a drone? A drone is an unmanned aerial system. There is no person inside flying the drone. The pilot is using a RC Transmitter to control the drone. When you send a command from the Transmitter to the drone the RC receiver sends a signal to the autopilot, for example if you ARM the drone the motors will start spinning because the autopilot communicates with the Electronic Speed Controllers also known as ESCs.



I enjoy teaching my friends how to fly a drone. Today I will teach you the first mission I teach my friends.


Mission 1: ARM & DISARM the Drone

When you ARM your drone your motors will start spinning and you are ready to take off. When you DISARM your drone the motors stop spinning and you are now ready to power your drone off.




How to ARM & DISARM your drone

드론을 무장 해제하는 방법

To ARM your drone move the Left Lever also known as the Throttle-stick down, to the right and hold for 3 seconds or until you see the motors begin to spin. Then bring the throttle-stick back to neutral position.

드론을 무장시키려면 스로틀 스틱이라고도 하는 왼쪽 레버를 아래로 내리고 오른쪽으로 3초 동안 또는 모터가 회전하기 시작할 때까지 기다립니다. 그런 다음 스로틀 스틱을 중립 위치로 되돌립니다.


To DISARM your drone move the Throttle-stick down, to the left and hold for 3 seconds or until the motors stop spinning.

드론을 무장 해제하려면 스로틀 스틱을 아래로 내리고 왼쪽으로 3초 동안 또는 모터가 회전을 멈출 때까지 기다립니다.



Lessons Learned

Practice makes habit and habit make perfect. I learned it's better to practice by imagining you are flying your drone so your fingers and your mind can programmed to fly really well.

When you know what mission you are flying it helps you not crash.


When I first flew my drone my dad was on ground station monitoring my flight on the computer and my mom was standing next to me so she could take control if anything got out of hand. Knowing that their were two people protecting my drone flight, I was confident. I began my Mission to fly into the air, the drone fluttered up with it's motors spinning faster and faster. The drone up in the air looked like a tiny bird under my control. This bird did exactly as I told it. When I didn't send any command it held it's position.

After a few minutes, the drone slowly began it's decent, my dad told me how many meters above the ground I was. When I finally landed my drone, I landed with great pride!

I DISARMED the drone and the motors stopped moving. It looked like the drone was a frozen statue in time.



다음검색
현재 게시글 추가 기능 열기

댓글

댓글 리스트
맨위로

카페 검색

카페 검색어 입력폼