본드마스터 일액형 에폭시 접착제 ..

[아템]

Bondmaster's product development specialists have formulated adhesive chemistries specifically for the high performance requirements of today's manufacturing and processing operations. Bondmaster's heat-cured epoxies can withstand operating temperature ranges from -65 to 450 degrees Fahrenheit, and provide shear strengths up to 5000 psi. Even with these superior performance characteristics, Bondmaster adhesives dispense quickly as single-part chemistries and cure, under induction heating, in 15 seconds.

How Do 1-Part Adhesives Work?
Bondmaster's 1-part epoxies have the hardener already included into the adhesive. With 1-part epoxies the hardener remains inactive in the formulation until the adhesive is heated. Although the heating method is unimportant, air circulating ovens continue to offer cost-effective curing, while, induction heating remains a popular alternative due to its rapid curing speed.

Adhesive Chart

• Curing
  Bondmaster 1-part epoxy adhesives offer the user complete working control of the adhesive. The formulation will not cure without being heated at a suitable temperature, for a sufficient period of time. When the adhesive is heated, curing is achieved in as little as 15 seconds.
  
  Bondmaster's 1-part, heat-cured epoxies set at temperatures over 90C/195F, providing extremely high application performance. Bondmaster epoxy adhesives have the strength and durability to replace mechanical joining techniques such as welding and riveting.

The table below represents a portion of the complete line of Bondmaster's 1-part epoxies. By using the 'Search' function, you can access detailed technical information and product MSDSs.



Or contact Bondmaster to discuss your specific application requirements, and our technical representatives will recommend the best adhesive for your application. Click the 'Contact Us' tab to find out how to reach Bondmaster worldwide.

Epoxies 1-Part, Bondmaster US

Grade	MSDS	Viscosity at 25C (cP)	Description
ESP104	MSDS	140,000	Low temperature, cure for plastics.
ESP308	MSDS	170,000	Toughened free flow at cure
ESP309	MSDS	150,000	Toughened partial flow at cure.
ESP310	MSDS	400,000	No sag or flow.
ESP4116	MSDS	150,000	High temperature, FDA approved.
ESP4128	MSDS	18,000	Heat cure, bonds plastics.
ESP4582	MSDS	70,000	High temperature.
ESP311	MSDS	Thixo-paste	High performance, metal bonding, toughened.
ESP312	MSDS	38,000	High chemical resistance.
ESP313	MSDS	Thixo-paste	Tubular bonding, dissimilar substrates, toughened
ESP314	MSDS	Thixo-paste	High strength, oily metal, high peel toughened.

Epoxies 1-Part, Bondmaster Europe

Grade TDS	MSDS	Description/typical applications	Colour	Viscosity at 25°C (mPa.s)	Maximum Gap Fill mm	Shear Strength Steel Mpa	Cure time (mins)at 150캜	Service Temperature (°C)	Available pack sizes	Minimum order quantity
ESP104	MSDS	Low temperature cure for plastics	Black	140,000	3	14	10	-40 to +150	5L	1 x 5L
ESP108*	MSDS	Free flowing aluminum filled. Heat exchangers and drill tips.	Silver	170,000	0.5	30	45	-40 to +180	5 x 320ml 5L 23L	1 pack of 5 1 x 5L 1 x 23L
ESP109*	MSDS	Non-metallic filled. Ceramic bonding.	Cream	150,000	1	30	45	-40 to +180	5 x 320ml 5L	1 pack of 5 1 x 5L
ESP110*	MSDS	Thixotropic aluminum filled. Structural stiffening and automotive subcomponents	Silver	400,000	4	30	45	-40 to +180	5 x 320ml 5L 23L	1 pack of 5 1 x 5L 1 x 23L
ESP770	MSDS	Ultra low viscosity unfilled	Light Amber	1,700	0.25	31	75	-40 to +150	5L	15 x 5L
ESP4116	MSDS	Suitable for food contact. Meets requirements of F&DA	White	240,000	0.7	21	15	-40 to +180	5L	15 x 5L
ESP4140	MSDS	Low density edge filling	Black	paste	10		15		1L Stick	40 x 1L
ESP4582	MSDS	Very fast setting. Magnet bonding and motor assembly.	Grey	67,500	2	20	15	-40 to +180	5 x 350g 27Kg	1 pack of 5 2 x 27Kg

*In the US, ESP110, ESP108, and ESP109 are named ESP310, ESP308, and ESP309.